Congratulations and welcome to your first year in Jewellery Art & Design at VCC!
Below is a comprehensive list of all items included in the kit that you are needing to start your journey. Off you go! :^)
• Mitutoyo Vernier Metric Sliding Caliper 150mm – [203081]
• Millimeter spring gauge [35-012-4]
• 6” metric metal ruler [35-510-1]
• Medium black diamond tweezers – [57-03532]
• 18mm black triplet loupe w/ rubber grip – [29-685]
• Precision set square w/ foot [35-144]
• 3” dividers – [ ]
• Replaceable tips (for use as scriber) – [35-0805-1]
• Double ended pin vise (silver colour) – [58-240]
• Steel bench block – [12-319]
• 2" Burnisher – [18-052]
• 2-1/2" Steel scraper – [52-101]
• Center punch – [47-900]
• Jeweller’s saw frame, 4” (Germany) – [49-704]
• 3/0 sawblades (1 gross) – [SB-SP-3/0-G]
• Wooden ring clamp – [48-125]
Files:
• 6” half round ring file, cut #0 – [31-128]
• 6” half round ring file, cut #2 – [31-130]
• 6” flat hand file, cut #0 – [31-144]
• 6” flat hand file, cut #1 – [31-145]
• 4 wood handles – [37-820]
• Set of 6 Grobet needle files, cut #2 – [V25-516-2]
• Set of 6 Grobet needle files, cut #4 – [V25-516-4]
Pliers:
• Flat – [PTBC0009]
• Round – [PTBC0010]
• Chain nose – [PTBC0008]
• Half round – [46-114]
• Flat/round – [46-735-1]
• Side cutters (nippers) – [46-124]
• Parallel – [46-512]
• Standard ring mandrel – [43-076]
• Round bezel mandrel – [43-036]
• Oval bezel mandrel – [43-034]
Hammers:
• Ball peen 4oz – [37-124]
• Riveting 2-3/4" head length – [37-244]
• Chasing 1" face – [37-194]
• Planishing 7oz – [37-333]
• Double ended nylon and brass 4oz [37-536]
• Raw hide mallet 6oz head – [37-702]
Emery sticks:
• 1, 2, & 2/0 – [11-344, 11-345, 11-342]
Emery paper:
• One sheet of each 320, 400, 600, 1200, 1500, 2000, 2500
• Chuck key with handle – [28-212]
Twist drills:
• 6x (73) 0.6mm, 6x (67) 0.8mm, 6x (64) 0.9mm, 3x (61) 1.0mm, 3x (56) 1.2mm, 3x (54) 1.4mm, 3x (52) 1.6mm, 3x (51) 1.7mm
Ball burs:
• One each 1.9mm, 4.0mm, 5.0mm, 5.5mm, 6.0mm
Setting burs:
• One each 3.0mm, 4.0mm, 6.0mm
Inverted cone burs:
• One each 1.0mm, 1.6mm, 2.0mm
• Inside Ring HSS Cylinder bur (6.30mm x 13mm) – [BS594]
• Split mandrel x3 – [11-308]
• Screw mandrel x3 – [43-128]
• Snap-on mandrel x2 – [10-740]
• Metal snips – [53-800]
• 2x solder tweezers, curved and straight – one each [57-0757] & [PTBC0224]
• Straight cross-locking fire tweezers – [57-760-2]
• Curved cross-locking fire tweezers – [57-761-2]
• Third hand (round base with cross-locking tweezers) – [54-080]
• Torch lighter (striker) – [14-205]
• Flints – [14-206]
• Flux brush (camel hair, #1) – [16-231]
• Solder pick – [38-330]
• Rouge cloth, 9" x 11" – [17-076-2]
